Approved Fike installer

Fike fire alarm service in London

As an approved installer with Fike, we install, service, take over and fault-find Fike fire alarm systems across London, all to BS 5839-1.

Call us: 020 3837 0778 Book a free survey in 60s

BAFE approved
Fike registered
C-TEC certified

Book your free survey

Step 1 of 6

Takes 60 seconds. Free survey, free quote, no obligation.

What do you need help with?

Please choose a service to continue.

Something went wrong sending your request. Please try again, or call 020 3837 0778.

This booking form needs JavaScript. To book, call 020 3837 0778 or email info@flameshieldlondon.co.uk and we'll arrange your free survey by phone.

BAFEFire Safety Register 303184

FikeApproved installer

C-TECCertified engineers

Gas SafeGroup registration

NICEICGroup registration

ibRegistered member

Fike panels, serviced by an approved installer

Approved status means the training, the parts and the software are the manufacturer's, not a best guess.

Approved installer

Fike-approved for installation and service, with engineers trained on the panel range.

Faults fixed properly

Access to the right parts and configuration tools rather than workarounds that store up trouble.

Serviced to BS 5839-1

Six-monthly servicing, certificate and written report, same as any system we look after.

Takeover welcome

Inherited a Fike panel from another contractor? The takeover audit is free.

Why use a registered Fike installer?

Fire alarm panels are not generic. A company that knows the Fike range configures, services and fault-finds it faster and more reliably than a general contractor working it out on site. Flame Shield London is BAFE registered and an approved Fike and C-TEC installer, and our technicians are fully qualified and BAFE certified. Whether your Fike system is new, inherited or playing up, you are dealing with people who know the equipment.

Direct answer: Flame Shield London is a registered Fike installer. We install, commission, service and repair Fike fire alarm systems to BS 5839-1, and we can take over a Fike system that another company installed, with a free audit first.

What we do with Fike systems

Installation and commissioning of new Fike systems, designed to the right BS 5839-1 category.
Servicing and maintenance, six-monthly, with a certificate after every visit.
Takeover of Fike systems installed by others, with a free audit first.
Fault-finding and repair, from panel faults to device and wiring problems.

Fike panel showing a fault?

If your Fike panel is showing a fault or the alarm keeps sounding, call 020 3837 0778 during opening hours. Sometimes we can talk you through a simple reset or check on the phone. Where a visit is needed, we will diagnose and fix the fault and leave you with a working, certified system. We do not advertise 24/7 callout; our phone is answered during opening hours.

A Fike panel in the wrong hands

Both jobs get called the same thing on the invoice. This is what actually differs.

Access No panel software, so the fault gets muted Approved installer, with the manufacturer's tools and parts Fike approved
Diagnosis Devices swapped one at a time until it stops beeping The panel read properly, then the actual fault fixed Root cause
Servicing A visit that leaves no record behind Six-monthly service to BS 5839-1, certificate and report every time Every visit
Inherited system Told you have to stay with whoever installed it Free takeover audit, then straight onto a compliant schedule Free audit

How it works

Four steps, the price agreed in writing before anyone starts, and one accredited team from survey to certificate.

Tell us about the panel

Model if you know it, and what it is doing, or not doing, right now.
Free audit or survey

We check the system on site and report on condition, compliance and faults.
Written quote

Service, repair or replacement, priced in writing before any work starts.
Serviced and certificated

Six-monthly visits, certificate and report every time.

What clients say after the first visit

A cross-section of the offices, HMOs and blocks we look after across London.

The old panel kept throwing faults and our previous company never turned up. Flame Shield took it over, cleared the faults in one visit, and we get a certificate every service now.

James H.Office manager, Islington

Fire alarm and emergency lighting across a three-storey office, on a tight deadline. Clean job, tidy cabling, and the BS 5839 side explained in plain English.

Priya S.Facilities lead, Wood Green

As a landlord with two HMOs I just want it compliant and documented. Their engineer talked me through what the regs need and emailed the certificates the same week.

Daniel O.Landlord, Enfield

Fike fire alarm service: your questions answered

Are you a registered Fike installer?

Yes. Flame Shield London is BAFE registered and an approved Fike and C-TEC installer. That means we install, commission, service and maintain Fike fire alarm systems, and our technicians are fully qualified and BAFE certified.

Can you service a Fike system another company installed?

Yes. You do not need to stay with the company that installed your Fike panel. We take over Fike systems from other providers, and the initial takeover audit is free. We inspect the system, report on its condition and compliance, and move it onto a maintenance schedule.

My Fike panel is showing a fault. Can you help?

Often we can. If your Fike panel is showing a fault or the alarm keeps sounding, call us on 020 3837 0778 (Mon to Fri 9am to 7pm, Sat 10am to 3pm). Sometimes we can guide you through a simple check over the phone; where a visit is needed, we will arrange one and put the fault right.

Do you maintain Fike Twinflex systems?

Yes. As an approved Fike installer we service and maintain Fike systems, including two-wire ranges, to BS 5839-1, with a certificate after every service visit.