Matched to the risk
Water, foam, CO2, powder and wet chemical, specified for what is actually in the building.
BS 5306
The right extinguishers, in the right places, kept in date. Supplied, serviced and certified to BS 5306-3 and BS 5306-8.
Takes 60 seconds. Free survey, free quote, no obligation.
Thanks, we'll call you within one working day to confirm your visit.
Need us sooner? Call 020 3837 0778Mon to Fri 9am–7pm · Sat 10am–3pm
BAFEFire Safety Register 303184
FikeApproved installer
C-TECCertified engineers
Gas SafeGroup registration
NICEICGroup registration
ibRegistered member
Supply, commissioning and annual servicing to BS 5306, so what is on the wall matches the risk in the room.
Water, foam, CO2, powder and wet chemical, specified for what is actually in the building.
Serviced and labelled every year, with extended service and replacement scheduled when they fall due.
Mounted at the right height on escape routes, with signage so they can be found under pressure.
Basic extinguisher training available so someone on site is confident to act.
The correct provision depends on the fire risks in each area, not a one-size box-ticking exercise. We stock the four common types and match them to the hazards during the survey:
| Type | Suited to |
|---|---|
| Water | Ordinary combustibles: paper, wood, textiles |
| Foam | Combustibles and flammable liquids |
| CO2 | Electrical equipment and flammable liquids |
| Powder | Broad-spectrum risks, plant rooms, vehicles |
Direct answer: the right extinguisher depends on what could burn. Water and foam for ordinary combustibles, CO2 for electrical risks, powder as a broad-spectrum option. BS 5306-8 guides how many you need and where they go.
Every extinguisher needs an annual basic service by a competent person, with extended servicing at longer intervals depending on type, all set out in BS 5306-3. Your own staff should also carry out a quick monthly visual check. We handle the professional servicing, replace anything that fails, and keep your records straight. All our services support compliance with insurance policies.
Both jobs get called the same thing on the invoice. This is what actually differs.
Four steps, the price agreed in writing before anyone starts, and one accredited team from survey to certificate.
We count what you have, check its condition and identify what the risk actually calls for.
Units, positions, signage and price, in writing, with no obligation.
Delivered, mounted, commissioned and labelled to BS 5306.
Booked in each year with a certificate, so nothing quietly goes out of date.
A cross-section of the offices, HMOs and blocks we look after across London.
The old panel kept throwing faults and our previous company never turned up. Flame Shield took it over, cleared the faults in one visit, and we get a certificate every service now.
Fire alarm and emergency lighting across a three-storey office, on a tight deadline. Clean job, tidy cabling, and the BS 5839 side explained in plain English.
As a landlord with two HMOs I just want it compliant and documented. Their engineer talked me through what the regs need and emailed the certificates the same week.
Fire extinguishers need a basic service by a competent person every year, with an extended service or overhaul at longer intervals depending on the type, as set out in BS 5306-3. On top of the annual service, someone on site should give them a quick visual check monthly. We service, certificate and label every unit.
It depends on the fire risks in each area. Water and foam suit ordinary combustibles like paper and textiles, CO2 suits electrical risks and flammable liquids, and powder is a broad-spectrum option often used in plant rooms and vehicles. We stock water, foam, CO2 and powder, and advise on the right mix during the survey.
BS 5306-8 guides the type, number and placement based on the size and use of the building and the risks present. Extinguishers should be sited on escape routes near exits and specific hazards. Our survey works out the correct provision so you are neither under-equipped nor paying for units you do not need.
Yes. We supply, install, service and certificate extinguishers, and we replace units that have been used, are out of date, or have failed inspection. Installation and servicing follow BS 5306-3 and BS 5306-8.
The legal starting point under the Fire Safety Order 2005, by a team that can also fix what it finds.
Fire risk assessment
Installation, testing and certification to BS 5266-1 so escape routes stay lit when the power fails.
Emergency lighting
Fire door verification, fire safety signage and staff training so your whole building stays compliant.
Fire doors & trainingFree survey · No obligation
New extinguishers, annual servicing, or both. Book a survey and we will get your provision right and your certificates current.
We would like to set Google Analytics cookies to see how the site is used, so we can improve it. We only set them if you accept. Nothing is loaded until you choose, and refusing changes nothing about how the site works.