020 3393 1661Mon to Fri 9am–7pm · Sat 10am–3pm Book a free survey 020 3393 1661
BAFE registered fire alarm companyOrganisation 303184, scheme SP203-1

Fire alarm installation in Kensington and Chelsea

Period houses, mansion flats and converted terraces from Notting Hill to Chelsea, including a house in W8 we serviced in October 2026.

Call us: 020 3393 1661 See what we do
BAFE registered Fire alarms

Question 1 of 4

Book a free survey

Three taps and your number. Free survey, no obligation.

What do you need?

Pick one to carry on.

Something went wrong sending your request. Please try again, or call 020 3393 1661.

What each accreditation covers, and how to verify it

What we are usually called out to in Kensington and Chelsea

Kensington and Chelsea is mostly residential and mostly old: stucco terraces, mansion blocks and large houses, many of them split into flats, with hotels in converted townhouses around Earl’s Court and South Kensington, and shops and restaurants along Kensington High Street, the King’s Road and Portobello Road.

Fifty minutes to an hour from Southgate across town. Parking is the hard part here: if the building has a bay or a contractor permit, tell us when you book.

Kensington and Chelsea, Central London
Kensington and Chelsea · W8, W11, SW3, SW5, SW7, SW10

Fire safety services in Kensington and Chelsea

Every service we offer, in Kensington and Chelsea as across the rest of London: the assessment first, then the work it lists, then the servicing that keeps it signed off.

Buildings we work on in Kensington and Chelsea

Four building types that come up again and again across W8, W11, SW3, SW5, SW7, SW10, and what each one actually needs from a fire alarm system.

  1. Large period houses

    Systems over several floors, often a conventional panel with a zone per floor, serviced without disturbing the ceilings.

  2. Mansion blocks

    Common parts usually under a stay-put strategy, with each flat on its own alarm and emergency lighting on the stairs.

  3. Houses converted into flats

    Interlinked alarms in each flat and the shared hallway, to the grade the fire risk assessment calls for.

  4. Townhouse hotels

    Sleeping risk on every floor of a building never designed as a hotel, so detection in every room and a clear route out.

Everything Kensington and Chelsea buildings need, one accredited team

The same services across W8, W11, SW3, SW5, SW7, SW10: the assessment first, then the work it specifies and the servicing that keeps it compliant.

Legal duty Fire risk assessment The assessment the Fire Safety Order puts on you, by a team that can also fix what it finds. What an assessment covers BS 5839-1 Fire alarm installation Designed, installed, commissioned and certificated, each stage with its own certificate. How an install runs Six-monthly Servicing & maintenance Two visits a year by a competent person, with a certificate after every one. What a visit includes Every device tested System takeover You are not tied to whoever installed it. We test every device first, then take over the servicing. Book the takeover report
Show all servicesShow fewer services 16 more

Assessment & compliance

FRA remedial worksFire Safety Order 2005 Emergency lightingBS 5266-1 Emergency lighting installationBS 5266-1 Emergency lighting repairsBS 5266-1

Fire alarm systems

Fire alarm designBS 5839-1 Addressable systemsBS 5839-1 Conventional systemsBS 5839-1 For managing agentsBS 5839-1 Repair & fault findingBS 5839-1 Panel fault: what it meansBS 5839-1 Fire alarm replacementBS 5839-1 Fike alarm serviceBS 5839-1 C-TEC alarm serviceBS 5839-1

Equipment & passive protection

Fire extinguishersBS 5306-3 & BS 5306-8 Fire doors, signage & trainingFire Safety (England) Regs 2022 Fire door repairsBS 476-22

Buildings we work in most

Blocks of flats

Freeholders, RMC directors and managing agents. Communal systems, stay put and what an FRA specifies.

What this building needs

HMOs & shared housing

Landlords and letting agents. Licensing conditions, council schedules of works and BS 5839-6 grades.

What this building needs

Restaurants & takeaways

The kitchen is why the alarm keeps going off, and the fix is detector selection rather than an isolated zone.

What this building needs

What happens when you get in touch

Four steps, the price agreed in writing before anyone starts, and one accredited team from the first Kensington and Chelsea survey to the certificate.

  1. 01

    Tell us about the building

    One call, or 60 seconds on the form. You speak to an engineer rather than a call centre, and you are called back within 7 to 24 hours.

  2. 02

    Free survey and written quote

    An engineer comes out to Kensington and Chelsea, explains plainly what the law asks of you, and puts the price in writing. No obligation either way.

  3. 03

    Installed and certified

    Work is carried out to BS 5839-1 and commissioned properly, then you get the certificate your insurer and fire officer ask to see.

  4. 04

    Serviced, year after year

    Six-monthly visits from the same team, with a written report every time, so your compliance never quietly lapses.

Book a free survey

What a system costs in Kensington and Chelsea

A large period house and a converted terrace price nothing alike, and listed ceilings change how the cable runs. Choose the system type that matches yours.

  • A new system designed, installed, commissioned and certificated to BS 5839-1.

    System type
    devices

What moves a fire safety price, and where the money actually goes

Fire alarms in listed and period buildings

Many buildings here are listed or in conservation areas, with ornate plaster ceilings and cornices that nobody wants drilled. Detectors have to sit where they work and where the ceiling allows, cables have to be run with as little disturbance as possible, and testing has to leave the plasterwork as it was. On our Kensington service every detector was tested in place from the floor with a pole tester, which is how a period ceiling should be treated.

Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person for the building (usually the employer, owner, landlord or managing agent) has to make sure a fire risk assessment is carried out and the fire precautions are kept working. Getting the design wrong is not just a technical problem, it is that duty left unmet.

Fire safety in Kensington and Chelsea

Postcodes
W8, W11, SW3, SW5, SW7, SW10
Region
Central London
Also nearby
Notting Hill, Earl’s Court, South Kensington
A takeover audit here starts with
whether the detectors in period rooms are the right type and can still be reached for testing

Fire safety in Kensington and Chelsea: your questions

Have you worked in Kensington?

Yes. In October 2026 we serviced the fire alarm at a period house in W8: a C-TEC conventional panel, four zones and twelve detector tests, all passed. The write-up, with photographs, is on our projects page.

Can you take over an existing system in Kensington and Chelsea?

Yes. It starts with a free survey, then a takeover report, £250 + VAT for up to 15 devices. We test what is installed, tell you in writing whether it matches the building and the standard, and quote to take over the servicing. There is no gap in your cover while you switch. In Kensington and Chelsea that report usually starts with whether the detectors in period rooms are the right type and can still be reached for testing.

How often does a commercial fire alarm have to be serviced?

BS 5839-1 recommends inspection and servicing by a competent person at least every six months. That does not change with the postcode. What changes is what the engineer should be looking at, which is why we survey the building rather than working from a checklist.

Service areas near Kensington and Chelsea

We cover Central London and the rest of London. Pick a nearby area, or see every location we work in.

Fire alarm services in Islington Islington Central London Explore location Fire alarm services in Camden Camden Central London Explore location Fire alarm services in Westminster Westminster Central London Explore location Fire alarm services in City of London City of London Central London Explore location
See all areas we cover

Where we work in Kensington and Chelsea

Not sure if we reach your street? Call 020 3393 1661.

We are at 7A Cecil Road, London N14 5RH.

Fire alarm services near Kensington and Chelsea

Where this comes from

We name the standard rather than quoting it. British Standards are copyright of BSI and have to be bought from them; the links above are to the publisher so you can check any figure on this page against the source.

Free survey · No obligation

Book a free fire safety survey in Kensington and Chelsea

Tell us about the building and an accredited engineer covering Kensington and Chelsea calls you back within 7 to 24 hours. Honest advice, a clear written quote, no obligation.

  • BAFE SP203-1 registered for fire alarms, Fike and C-TEC certified
  • Written quote before any work starts
  • Called back within 7 to 24 hours
Book your free survey Prefer to talk?020 3393 1661 BAFE registered fire alarm companyOrganisation 303184, scheme SP203-1